Skip to main content

What is Non Newtonian Fluid?

Many people have heard of Sir Isaac Newton. He is famous for developing many scientific theories in mathematics and physics. Newton described how ‘normal’ liquids or fluids behave, and he observed that they have a constant viscosity (flow). This means that their flow behaviour or viscosity only changes with changes in temperature or pressure. For example, water freezes and turns into a solid at 0˚C and turns into a gas at 100˚C. Within this temperature range, water behaves like a ‘normal’ liquid with constant viscosity.

Typically, liquids take on the shape of the container they are poured into. We call these ‘normal liquids’ Newtonian fluids. But some fluids don’t follow this rule. We call these ‘strange liquids’ non-Newtonian fluids.

Stress and strain

In science, stress means that a force is applied to a body. The result of that stress is described as strain.

Imagine hitting a metal with a hammer. The force that is applied on the metal causes stress to that particular area. The result of that stress is then described as strain – in this case, possibly a deformation of the metal. Newtonian fluids don’t resist much stress that is applied on them like solids would do, so they don’t show the signs of strain. If you hit water with a hammer, the liquid will not resist much to the stress applied and will also not show signs of strain.

 Thixotropic and rheopectic are non-Newtonian liquids that react as a result of the length of time that stress is applied.

Non-Newtonian fluids change their viscosity or flow behaviour under stress. If you apply a force to such fluids (say you hit, shake or jump on them), the sudden application of stress can cause them to get thicker and act like a solid, or in some cases it results in the opposite behaviour and they may get runnier than they were before. Remove the stress (let them sit still or only move them slowly) and they will return to their earlier state.

Say you want to get some tomato sauce out of the bottle. You know there is some in there, but when you turn the bottle upside down, nothing comes out. So what do you do? You shake or hit the bottle. This causes the tomato sauce to become more liquid and you can easily squirt some out. In this case, the sauce’s viscosity decreases and it gets runnier with applied stress.

Oobleck is a mixture of cornflour and water (similar to uncooked custard) named after a substance in a Dr Seuss book. This liquid is a runny goo until you apply stress to it, and then it suddenly acts like a solid. You can hit a bowlful with a hammer, and instead of splashing everywhere, the particles lock together. You can roll it into a solid ball in your hand, but if you stop moving it, it reverts to liquid and oozes out through your fingers. In this case, the oobleck’s viscosity or resistance to flow increases with applied stress.

Different types of non-Newtonian fluids

Not all non-Newtonian Fluids behave in the same way when stress is applied – some become more solid, others more fluid. Some non-Newtonian fluids react as a result of the amount of stress applied, while others react as a result of the length of time that stress is applied.

Why do non-Newtonian fluids matter?

The behavior of non-Newtonian fluids has important implications:

If a house is built on certain types of clay and an earthquake puts stress on this material through the sudden movement, the apparently solid clay can turn into a runny liquid.
Body armor that behaves like a liquid so that you can move easily but turns into a solid on impact from stress could be useful for police or the military.
Fun! Making oobleck is a great reason to make a mess, all in the name of science!


Popular posts from this blog



In  this  configuration  the  input  is  applied  between the  base  and  the  collector and  the  output  is  taken  from  the  collector  and  the  emitter.  Here  the  collector  is common to both the input and the output circuits as shown in Fig.

  Common Collector Transistor Circuit

In  common  collector  configuration  the  input  current  is  the  base current  IB  and  the output current is the emitter current IE. The ratio of change in emitter current to the  change in the base current is called current amplification factor.

It is represented by


A test  circuit  for determining the  static characteristic  of an NPN transistor is shown in Fig. In this circuit the collector is common to both the input and the output circuits.   To   measure   the   base   and   the   emitter   currents,   milli   ammeters   are connected in series with the base and the emitter circuits. Voltmeters are connected   across the input an…

XII - Ch# 12 : Electrostatics :Solved Numericals

Solution Manual : Mathematical methods for physicists 5th edition Arfken and Weber

DJ VU Reader
Book Description Now in its 7th edition, Mathematical Methods for Physicists continues to provide all the mathematical methods that aspiring scientists and engineers are likely to encounter as students and beginning researchers. This bestselling text provides mathematical relations and their proofs essential to the study of physics and related fields. While retaining the key features of the 6th edition, the new edition provides a more careful balance of explanation, theory, and examples. Taking a problem-solving-skills approach to incorporating theorems with applications, the book's improved focus will help students succeed throughout their academic careers and well into their professions. Some notable enhancements include more refined and focused content in important topics, improved organization, updated notations, extensive explanations and intuitive exercise sets, a wider range of problem solutions, improvement in the placement, and a wider ra…